Skip to content

4Hawks SuperRange antenna for Inspire 2

by 4Hawks
$169.99
PLEASE NOTE THERE IS UP TO A 1 WEEK LEAD TIME ON THIS ANTENNA! THIS ANTENNA IS A NON INSTOCK ANTENNA AND, SHIPPING RATES WILL BE HIGHER ON THIS ANTENNA!  PRICE THAT YOU SEE IS WITH THE PARTIAL SHIPPING THAT NEEDS TO BE THERE. THEN JUST CHOOSE PRIORITY MAIL SHIPPING AT CHECK OUT. ORDER WILL BE SHIPPED WITH EXPRESS DHL AND, IS USUALLY 2 DAYS TO YOURE DOOR AFTER SHIPMENT!
Raptor_SR_białe_tło.jpg
Designed for Inspire 2
Dji Inspire 2 is one of newer models made for professional users. It is definitely a flagship of professional models currently available on the market. The drone’s body is made from magnesium alloys. Cameras included are easily interchangeable with quality up to 5.2k. The basic kit allows for up to 30 minutes of uninterrupted flight, maximum speed of 90km/, Drone is targeted for professional movie makers who require perfection in every sense.
Not only does 4Hawks increase the range of Dji Inspire 2, but most of all it assures that no details on your screen are omitted and no glitches are visible on the screen. With our range extender, the performance is exceptional even in noisy areas. 4Hawks antenna for Dji Inspire 2 model is operating in 2.4GHz with 8dBi gain as well as 5GHz frequency with 10dBi gain. Entire construction is 100% UV protected to assure longevity of the equipment. Additionally, part of the construction is made of aluminum to make the whole construction as light as possible. Mounting is made of stainless steel for rock solid stability.
Mounting the range extender is might require an assistance of a professional. The entire set is lightweight and uniform (without any loose equipment pieces).  Changing the direction of the antenna shouldn’t cause any difficulties, as the system was designed in a way that allows quick position change with just a single “click” to 5 different positions. This way you can be sure that you do not lose the connection with your drone.
antena-do-description.jpg
Extender Flight Range

Extender Flight Range

Noise removal from other devices

Noise removal from other devices

Improved video signal

Improved video signal

Adjustable signal direction

Adjustable signal direction

High quality, lightweight design

High quality, lightweight design

Complete solution

Complete solution

Separate-light-line.jpg

Specification

electrical & mechanical parameters of Raptor renge extender.

Electrical parameters

Frequencies
Port 1:   2.40 - 2.50 GHz & 5.00 - 5.80 GHz
Port 2:   2.40 - 2.50 GHz & 5.00 - 5.80 GHz
Gain
Port 1:   8 dBi  (+/- 1 dBi) & 10 dBi  (+/- 1 dBi)
Port 2:   8 dBi  (+/- 1 dBi) & 10 dBi  (+/- 1 dBi)
VSWR
Port 1:   < 1.50  (max. < 2.15)
Port 2:   < 1.50  (max. < 2.15)
Beamwidth
Port 1:   90°/65° & 55°/55°
Port 2:   90°/65° & 55°/55°
Polarization
Port 1:   Vertical
Port 2:   Vertical
Impedance
Port 1:   50 Ω
Port 2:   50 Ω

Material
Antenna:   Samsung ABS, polyurethane, aluminum, Stainless steel, Nylon, PTFE PCB
Mounting:   Stainless steel + paint
Weight
~ 200g (110g Antenna + 90g Mounting)
Dimensions
16.1 x 9.1 x 1.7 cm
6.34 x 3.60 x 0.67 inch
Connection
Port 1:   RP-SMA female
Port 2:   RP-SMA female
Tilt adjustment
3 tilt positions, OnClick system
Mounting type
On SMA connectors (Permanent)
Separate-light-line.jpg

In the box

Accesories included to the Raptor range extender antenna
Range extender antenna

Range extender antenna

2x Dedicated for Phantom MMCX pigtails

2x Dedicated for Phantom MMCX pigtails

Stainless steel mounting kit

Stainless steel mounting kit

2x screwdriver (Torx T6 & Philips) + 8mm wrench

2x screwdriver (Torx T6 & Philips) + 8mm wrench

2x RP-SMA male RG316 black pigtails

2x RP-SMA male RG316 black pigtails

Separate-light-line.jpg

Plots

VSWR, Separation between connectors & characteristic patter of Raptor antennas
Raptor SR for Spark 2.4 GHz Port 1 & Port 2, Radiation Pattern.png
Raptor SR for Spark 2.4 GHz Port 1 & Port 2, Radiation Pattern Azimuth.png
Raptor SR for Spark 5.8 GHz Port 1 & Port 2, Radiation Pattern Azimuth.png
Raptor SR for Spark Dual Band Port 1, VSWR.png
Raptor SR for Spark Dual Band Port 1, Smith Chart.png
+Raptor SR for Spark Dual Band Port2-Port1, Port Isolation.png
Raptor SR for Spark 2.4 GHz Port 1 & Port 2, Radiation Pattern Elevation.png
Raptor SR for Spark 5.8 GHz Port 1 & Port 2, Radiation Pattern Elevation.png
Raptor SR for Spark Dual Band Port 2, VSWR.png
Raptor SR for Spark Dual Band Port 2, Smith Chart.png