ALIENTECH PRO 5.8G Antenna Signal Booster Range Extender with amplifier for DJI Smart Controller
Looking for an antenna that will take your drone to new heights For your DJI Smart Controller?
The ALIENTECH PRO 5.8G signal booster is an active directional antenna with two power amplifiers for a range extender, applicable to the 5.725Ghz-5.800Ghz frequency band.
With a comprehensive transmission gain of 30-36dBi, a receiving gain of 25-30dB and a dual-polarization of Vertical and horizontal, it can enhance your drone's wireless signal strength, lengthen the transmission distance and stabilize signal reception Inside the booster there are two 18650@2900 mAh rechargeable lithium batteries, which can be used continuously for over 300 minutes each time.
Enhanced Drone Performance
The signal enhancement function, high gain, and concentration of limited signals in the front section of the antenna and their directional transmission have effectively improved the flight and image transmission distance of drones, making the flight safer. The 1-second quick assembly and disassembly function minimizes your pre-flight preparation time;
ALIENTECH PRO5.8G Booster with a pair of built-in coaxial cables that can be used for Spark Mavic Mini(FCC mode) / Air / Pro 2 / Zoom / Enterprise, Phantom 4 Pro / V2.0 / RTK, Inspire 1 2 Pro, Matrice 100 / 200 / 600 Pro, Smart remote controller, DJI drones
- Frequency Range: 5150-5850MHz
- Gain: 5.8GHz 15dBi±0.5；
- Horizontal Beamwidth：8GHz 40°±5°
- F/B Ratio: 5.8GHz ≥22dB
In addition to the antenna, the following accessories are contained in the package:
- Pair of external link cables
- Pair of internal connection cables
ATTENTION: Please pay attention before you place an order. You need to disassemble the original remote and remove the original antenna before you install the cable. In theory, although the installation process is non-destructive installation. However, you still have the risk of damaging the original remote control and losing the warranty for the remote control or drone. And users need to be careful that the outer insulation layer and shielding metal layer of the coaxial cable are intact.